The model M.C.B.T.M. 1 cuts just vertically, with two blades. Its function is to make the vertical cuts only. You will require a combined machine to finish the block extraction process.
The equi-distribution of the weights and the technique of construction warrant the perfect stability to ensure no vibration.
The cutting of the stone is a dry-cut, thanks to steel circular blades, with special carbide tips which are easily replaced when used up. The machine is supplied with electrical safety features and gadgets and is very easy to operate. It requires very few hours of training.
Technical features – Two Disk machine
Model | Total Power | Vertical Disk Power | HP feed | HP Hydraulic station | Feed speed mt/min | Cut depth | Engine wheels | Chassis | Electric box | Roof | Rails | Weight +/- kg. | Double opposite vertical disk (for tracing) |
M.C.B.T.M. 1 | 31 | 25 | 3 | 3 | 25-30 mt/min | 300 mm | 4 | Medium | By request | NO | Normal T 45 mm | YES |
The model M.C.B.T.M. 2 cuts just vertically, with two blades. Its function is to make the vertical cuts only. You will require a combined machine to finish the block extraction process.
The equi-distribution of the weights and the technique of construction warrant the perfect stability to ensure no vibration.
The cutting of the stone is a dry-cut, thanks to steel circular blades, with special carbide tips which are easily replaced when used up. The machine is supplied with electrical safety features and gadgets and is very easy to operate. It requires very few hours of training.
Technical features – Two Disk machine
Model | Total Power | Vertical Disk Power | HP feed | HP Hydraulic station | Feed speed mt/min | Cut depth | Engine wheels | Chassis | Electric box | Roof | Rails | Weight +/- kg. | Double opposite vertical disk (for tracing) |
M.C.B.T.M. 2 | 36 | 30 | 3 | 3 | 25-30 mt/min | 300 mm | 4 | Medium | By request | NO | Normal T 45 mm | YES |
The model M.C.B.T.P. cuts just vertically, with two blades. Its function is to make the vertical cuts only. You will require a combined machine to finish the block extraction process.
The equi-distribution of the weights and the technique of construction warrant the perfect stability to ensure no vibration.
The cutting of the stone is a dry-cut, thanks to steel circular blades, with special carbide tips which are easily replaced when used up. The machine is supplied with electrical safety features and gadgets and is very easy to operate. It requires very few hours of training.
Technical features – Two Disk machine
Model | Total Power | Vertical Disk Power | HP feed | HP Hydraulic station | Feed speed mt/min | Cut depth | Engine wheels | Chassis | Electric box | Roof | Rails | Weight +/- kg. | Double opposite vertical disk (for tracing) |
M.C.B..T.P | 46 | 40 | 3 | 3 | 25-30 mt/min | 300 mm | 4 | Medium | By request | NO | Normal T 50 mm | YES |
The model M.C.B.T.P.E cuts just vertically, with two blades. Its function is to make the vertical cuts only. You will require a combined machine to finish the block extraction process.
The equi-distribution of the weights and the technique of construction warrant the perfect stability to ensure no vibration.
The cutting of the stone is a dry-cut, thanks to steel circular blades, with special carbide tips which are easily replaced when used up. The machine is supplied with electrical safety features and gadgets and is very easy to operate. It requires very few hours of training.
This model comes with more power than the predecessor series (see specs below), includes an electric box and the roof is optional.
Technical features – Two Disk machine
Model | Total Power | Vertical Disk Power | HP feed | HP Hydraulic station | Feed speed mt/min | Cut depth | Engine wheels | Chassis | Electric box | Roof | Rails | Weight +/- kg. | Double opposite vertical disk (for tracing) |
M.C.B..T.P.E | 60 | 50 | 5 | 5 | 25-30 mt/min | 300 mm | 4 | Medium | YES | Optional | Normal T 50 mm | YES |
The model M.C.B.T.P.E Deluxe cuts just vertically, with two blades. Its function is to make the vertical cuts only. You will require a combined machine to finish the block extraction process.
The equi-distribution of the weights and the technique of construction warrant the perfect stability to ensure no vibration.
The cutting of the stone is a dry-cut, thanks to steel circular blades, with special carbide tips which are easily replaced when used up. The machine is supplied with electrical safety features and gadgets and is very easy to operate. It requires very few hours of training.
This model comes extra chasis, 8 wheels, includes an electric box and a roof.
Technical features – Two Disk machine
Model | Total Power | Vertical Disk Power | HP feed | HP Hydraulic station | Feed speed mt/min | Cut depth | Engine wheels | Chassis | Electric box | Roof | Rails | Weight +/- kg. | Double opposite vertical disk (for tracing) |
M.C.B..T.P.E | 60 | 50 | 5 | 5 | 25-30 mt/min | 300 mm | 8 | Extra | YES | YES | Extra DEC S 14 | YES |
The model M.C.B.T.P.E Super is the top of the range and cuts vertically, with two blades. Its function is to make the vertical cuts only. You will require a combined machine to finish the block extraction process.
The equi-distribution of the weights and the technique of construction warrant the perfect stability to ensure no vibration.
The cutting of the stone is a dry-cut, thanks to steel circular blades, with special carbide tips which are easily replaced when used up. The machine is supplied with electrical safety features and gadgets and is very easy to operate. It requires very few hours of training.
This model comes with extra power (see specs below), extra chasis, 8 wheels, includes an electric box and a roof.
Technical features – Two Disk machine
Model | Total Power | Vertical Disk Power | HP feed | HP Hydraulic station | Feed speed mt/min | Cut depth | Engine wheels | Chassis | Electric box | Roof | Rails | Weight +/- kg. | Double opposite vertical disk (for tracing) |
M.C.B..T.P.E Super | 115 | 100 | 10 | 5 | 25-30 mt/min | 300 mm | 8 | Extra super | YES | YES | Extra DEC S 14 | YES |
The model M.C.S.T.M. 1 features one horizontal blade. That means the tracing machine must first make the first two vertical cuts before the M.C.S.T.M 1 does the final horizontal cut.
The equi-distribution of the weights and the technique of construction gives perfect stability to ensure no vibration.
The cutting of the stone is a dry-cut, thanks to the steel circular blades, with special carbide tips which are easily replaced when used up. The machine is supplied with electrical safety features and gadgets and is very easy to operate. It requires very few hours of training.
Technical features – Horizontal Disk machine
Model | Total Power | Vertical Disk Power | HP feed | HP Hydraulic station | Feed speed mt/min | Cut depth | Engine wheels | Chassis | Electric box | Roof | Rails | Weight +/- kg. | Double opposite vertical disk (for tracing) |
M.C.S.T.M. 1 | 31 | 25 | 3 | 3 | 25-30 mt/min | 300 mm | 4 | Medium | By request | Optional | Normal T 45 mm | YES |
The model M.C.S.T.M. 2 features one horizontal blade. That means the tracing machine must first make the first two vertical cuts before the M.C.S.T.M 2 does the final horizontal cut.
The equi-distribution of the weights and the technique of construction gives perfect stability to ensure no vibration.
This machine has more power than its predecessor (see specs below)
The cutting of the stone is a dry-cut, thanks to the steel circular blades, with special carbide tips which are easily replaced when used up. The machine is supplied with electrical safety features and gadgets and is very easy to operate. It requires very few hours of training.
Technical features – Horizontal Disk machine
Model | Total Power | Vertical Disk Power | HP feed | HP Hydraulic station | Feed speed mt/min | Cut depth | Engine wheels | Chassis | Electric box | Roof | Rails | Weight +/- kg. | Double opposite vertical disk (for tracing) |
M.C.S.T.M. 2 | 36 | 30 | 3 | 3 | 25-30 mt/min | 300 mm | 4 | Medium | By request | Optional | Normal T 45 mm | YES |
The model M.C.S.T.P. features one horizontal blade. That means the tracing machine must first make the first two vertical cuts before the M.C.S.T.P does the final horizontal cut.
The equi-distribution of the weights and the technique of construction gives perfect stability to ensure no vibration.
This machine has more power than its predecessor (see specs below)
The cutting of the stone is a dry-cut, thanks to the steel circular blades, with special carbide tips which are easily replaced when used up. The machine is supplied with electrical safety features and gadgets and is very easy to operate. It requires very few hours of training.
Technical features – Horizontal Disk machine
Model | Total Power | Vertical Disk Power | HP feed | HP Hydraulic station | Feed speed mt/min | Cut depth | Engine wheels | Chassis | Electric box | Roof | Rails | Weight +/- kg. | Double opposite vertical disk (for tracing) |
M.C.S.T.P. | 48 | 40 | 5 | 3 | 25-30 mt/min | 300 mm | 4 | Medium | By request | Optional | Normal T 50 mm | YES |
The model M.C.S.T.P.E features one horizontal blade. That means the tracing machine must first make the first two vertical cuts before the M.C.S.T.P.E does the final horizontal cut.
The equi-distribution of the weights and the technique of construction gives perfect stability to ensure no vibration.
This machine has more power than its predecessor (see specs below)
The cutting of the stone is a dry-cut, thanks to the steel circular blades, with special carbide tips which are easily replaced when used up. The machine is supplied with electrical safety features and gadgets and is very easy to operate. It requires very few hours of training.
Technical features – Horizontal Disk machine
Model | Total Power | Vertical Disk Power | HP feed | HP Hydraulic station | Feed speed mt/min | Cut depth | Engine wheels | Chassis | Electric box | Roof | Rails | Weight +/- kg. | Double opposite vertical disk (for tracing) |
M.C.S.T.P.E | 60 | 50 | 5 | 5 | 25-30 mt/min | 300 mm | 4 | Medium | By request | Optional | Normal T 50 mm | YES |
The model M.C.S.T.P.E Deluxe features one horizontal blade. That means the tracing machine must first make the first two vertical cuts before the M.C.S.T.P.E Deluxe does the final horizontal cut.
The equi-distribution of the weights and the technique of construction gives perfect stability to ensure no vibration.
This machine has more power than its predecessor (see specs below), the blade cuts deeper (500 mm) and has a stronger rail.
The cutting of the stone is a dry-cut, thanks to the steel circular blades, with special carbide tips which are easily replaced when used up. The machine is supplied with electrical safety features and gadgets and is very easy to operate. It requires very few hours of training.
Technical features – Horizontal Disk machine
Model | Total Power | Vertical Disk Power | HP feed | HP Hydraulic station | Feed speed mt/min | Cut depth | Engine wheels | Chassis | Electric box | Roof | Rails | Weight +/- kg. | Double opposite vertical disk (for tracing) |
M.C.S.T.P.E Deluxe | 60 | 50 | 5 | 5 | 25-30 mt/min | 500 mm | 4 | Medium | By request | Optional | Extra DEC S 14 | YES |
The model M.C.S.T.P.E Super features one horizontal blade. That means the tracing machine must first make the first two vertical cuts before the M.C.S.T.P.E Super does the final horizontal cut.
The equi-distribution of the weights and the technique of construction gives perfect stability to ensure no vibration.
This machine is the top of the range in this category. It has more power than its predecessor (see specs below), the blade cuts deeper (500 mm), has eight wheels, comes with an electric box and roof.
The cutting of the stone is a dry-cut, thanks to the steel circular blades, with special carbide tips which are easily replaced when used up. The machine is supplied with electrical safety features and gadgets and is very easy to operate. It requires very few hours of training.
Technical features – Horizontal Disk machine
Model | Total Power | Vertical Disk Power | HP feed | HP Hydraulic station | Feed speed mt/min | Cut depth | Engine wheels | Chassis | Electric box | Roof | Rails | Weight +/- kg. | Double opposite vertical disk (for tracing) |
M.C.S.T.P.E Super | 90 | 75 | 10 | 5 | 25-30 mt/min | 500 mm | 8 | Extra super | YES | YES | Extra DEC S 14 | YES |
The model M.C.C.T.M. 1 machine cuts at the same time both vertically and horizontally. The machine can accommodate up to 3 vertical blades and 2 horizontal blades. While one horizontal blade makes the final bottom cut of the block, the second one levels the top of the block thus standardizing the size of the block. Standardized blocks with sharp corners fetch a better price in the market.
This machine comes in two versions:
- SQUARE version with two or three vertical blades and to horizontal blades
- NORMAL version with one vertical blade and one horizontal blade.
The equi-distribution of the weights and the technique of construction gives perfect stability to ensure no vibration.
The cutting of the stone is a dry-cut, thanks to the steel circular blades, with special carbide tips which are easily replaced when used up. The machine is supplied with electrical safety features and gadgets and is very easy to operate. It requires very few hours of training.
Technical features – Combined machine
Model | Total Power | Vertical Disk Power | Horizontal Disk Power | HP feed | HP Hydraulic station | Feed speed mt/min | Cut depth | Engine wheels | Chassis | Electric box | Roof | Rails | Weight +/- kg. | Double opposite vertical disk (for tracing) |
M.C.C.T.M. 1 | 56 | 25 | 25 | 3 | 3 | 25-30 mt/min | 300 mm | 4 | Medium | By request | Optional | Normal T 45 mm | 1.800 | NO |
The model M.C.C.T.P machine cuts at the same time both vertically and horizontally. The machine can accommodate up to 3 vertical blades and 2 horizontal blades. While one horizontal blade makes the final bottom cut of the block, the second one levels the top of the block thus standardizing the size of the block. Standardized blocks with sharp corners fetch a better price in the market.
This machine comes in two versions:
- SQUARE version with two or three vertical blades and to horizontal blades
- NORMAL version with one vertical blade and one horizontal blade.
The equi-distribution of the weights and the technique of construction gives perfect stability to ensure no vibration.
This machine has more power than its predecessor (see specs below).
The cutting of the stone is a dry-cut, thanks to the steel circular blades, with special carbide tips which are easily replaced when used up. The machine is supplied with electrical safety features and gadgets and is very easy to operate. It requires very few hours of training.
Technical features – Combined machine
Model | Total Power | Vertical Disk Power | Horizontal Disk Power | HP feed | HP Hydraulic station | Feed speed mt/min | Cut depth | Engine wheels | Chassis | Electric box | Roof | Rails | Weight +/- kg. | Double opposite vertical disk (for tracing) |
M.C.C.T.P | 88 | 40 | 40 | 5 | 3 | 25-30 mt/min | 300 mm | 4 | Medium | By request | Optional | Normal T 50 mm | 2200 | NO |
The model M.C.C.T.M. 2 machine cuts at the same time both vertically and horizontally. The machine can accommodate up to 3 vertical blades and 2 horizontal blades. While one horizontal blade makes the final bottom cut of the block, the second one levels the top of the block thus standardizing the size of the block. Standardized blocks with sharp corners fetch a better price in the market.
This machine comes in two versions:
- SQUARE version with two or three vertical blades and to horizontal blades
- NORMAL version with one vertical blade and one horizontal blade.
The equi-distribution of the weights and the technique of construction gives perfect stability to ensure no vibration.
This machine is the top of the range in this category. It has more power than its predecessor (see specs below).
The cutting of the stone is a dry-cut, thanks to the steel circular blades, with special carbide tips which are easily replaced when used up. The machine is supplied with electrical safety features and gadgets and is very easy to operate. It requires very few hours of training.
Technical features – Combined machine
Model | Total Power | Vertical Disk Power | Horizontal Disk Power | HP feed | HP Hydraulic station | Feed speed mt/min | Cut depth | Engine wheels | Chassis | Electric box | Roof | Rails | Weight +/- kg. | Double opposite vertical disk (for tracing) |
M.C.C.T.M. 1 | 66 | 30 | 30 | 3 | 3 | 25-30 mt/min | 300 mm | 4 | Medium | By request | Optional | Normal T 45 mm | 2000 | NO |
The model M.C.C.T.P.E machine cuts at the same time both vertically and horizontally. The machine can accommodate up to 3 vertical blades and 2 horizontal blades. While one horizontal blade makes the final bottom cut of the block, the second one levels the top of the block thus standardizing the size of the block. Standardized blocks with sharp corners fetch a better price in the market.
This machine comes in two versions:
- SQUARE version with two or three vertical blades and to horizontal blades
- NORMAL version with one vertical blade and one horizontal blade.
- This is the most popular model owing to its optimum power and can do very well in Volcanic rock areas (see specs below).The equi-distribution of the weights and the technique of construction gives perfect stability to ensure no vibration.
The cutting of the stone is a dry-cut, thanks to the steel circular blades, with special carbide tips which are easily replaced when used up. The machine is supplied with electrical safety features and gadgets and is very easy to operate. It requires very few hours of training.
Technical features – Combined machine
Model | Total Power | Vertical Disk Power | Horizontal Disk Power | HP feed | HP Hydraulic station | Feed speed mt/min | Cut depth | Engine wheels | Chassis | Electric box | Roof | Rails | Weight +/- kg. | Double opposite vertical disk (for tracing) |
M.C.C.T.P.E | 110 | 50 | 50 | 5 | 5 | 25-30 mt/min | 400 mm | 4 | Medium | YES | Optional | Normal T 50 mm | 3000 | NO |
The model M.C.C.T.P.E Super machine cuts at the same time both vertically and horizontally. The machine can accommodate up to 3 vertical blades and 2 horizontal blades. While one horizontal blade makes the final bottom cut of the block, the second one levels the top of the block thus standardizing the size of the block. Standardized blocks with sharp corners fetch a better price in the market.
This machine comes in two versions:
- SQUARE version with two or three vertical blades and to horizontal blades
- NORMAL version with one vertical blade and one horizontal blade.
- This is the top of the range machine with very superior specs. It is very ideal for a terrain with an inconsistent texture of the rock. This is very characteristic of the Coral rock. It also tends to perform very well in Volcanic rock areas. The 8 wheels give the machine an ideal traction for effective cut. In an area with a consistent texture of rock, this machine is capable of producing between 15,000 – 20,000 blocks a day, assuming a double shift of 8 hours each.
The equi-distribution of the weights and the technique of construction gives perfect stability to ensure no vibration.
The cutting of the stone is a dry-cut, thanks to the steel circular blades, with special carbide tips which are easily replaced when used up. The machine is supplied with electrical safety features and gadgets and is very easy to operate. It requires very few hours of training.
Technical features – Combined machine
Model | Total Power | Vertical Disk Power | Horizontal Disk Power | HP feed | HP Hydraulic station | Feed speed mt/min | Cut depth | Engine wheels | Chassis | Electric box | Roof | Rails | Weight +/- kg. | Double opposite vertical disk (for tracing) |
M.C.C.T.P.E Super | 215 | 100 | 100 | 10 | 5 | 25-30 mt/min | 400 mm | 8 | Extra Super | YES | YES | Extra DEC S 14 | 6,000 | NO |
The model M.C.C.T.P.E Deluxe machine cuts at the same time, both vertically and horizontally. The machine can accommodate up to 3 vertical blades and 2 horizontal blades. While one horizontal blade makes the final bottom cut of the block, the second one levels the top of the block thus standardizing the size of the block. Standardized blocks with sharp corners fetch a better price in the market.
This machine comes in two versions:
- SQUARE version with two or three vertical blades and to horizontal blades
- NORMAL version with one vertical blade and one horizontal blade.
- This machine is very ideal for a terrain with an inconsistent texture of the rock. This is very characteristic of the Coral rock. The 8 wheels give the machine an ideal traction for effective cut.
The equi-distribution of the weights and the technique of construction gives perfect stability to ensure no vibration.
This machine has more power than its predecessor (see specs below).
The cutting of the stone is a dry-cut, thanks to the steel circular blades, with special carbide tips which are easily replaced when used up. The machine is supplied with electrical safety features and gadgets and is very easy to operate. It requires very few hours of training.
Technical features – Combined machine
Model | Total Power | Vertical Disk Power | Horizontal Disk Power | HP feed | HP Hydraulic station | Feed speed mt/min | Cut depth | Engine wheels | Chassis | Electric box | Roof | Rails | Weight +/- kg. | Double opposite vertical disk (for tracing) |
M.C.C.T.P.E Deluxe | 110 | 50 | 50 | 5 | 5 | 25-30 mt/min | 400 mm | 8 | Extra | YES | YES | Extra DEC S 14 | 3500 | NO |
Smallest engine of the Diesel range with 170 HP.
Medium engine of the Diesel range with 209 HP.
Largest engine of the Diesel range with 285 HP. This is the King of the quarries, capable of producing up to 18,000 blocks daily assuming an ideal rock and double shift of 8 hours each.
The cutting of the stone is a dry-cut, thanks to steel circular blades with special carbide tips which are easily replaced when used up.